Open-E Wiki - User contributions [en]

Main Page

2014-05-16T12:43:00Z

Maintenance script: Importing text file

[[ATTOFibreChannel]] 
[[Acl]] 
[[ActivationUpload]] 
[[AddedLicenceKeys]] 
[[AdminAccess]] 
[[AdminPassword]] 
[[AdvRestore]] 
[[AntivirusOnline]] 
[[AntivirusSetup]] 
[[AntivirusTasks]] 
[[ApiConfiguration]] 
[[AppletalkAfpSettings]] 
[[AppletalkSettings]] 
[[AuthenticationMethod]] 
[[AuxiliaryPaths]] 
[[BackupSettings]] 
[[BaculaBackupClient]] 
[[BondingConfigure]] 
[[BondingCreate]] 
[[BondingRemove]] 
[[BondingStatus]] 
[[ChapUserTargetAccess]] 
[[CheckSys]] 
[[ClockSettings]] 
[[ConnectionsReset]] 
[[ControllersInfo]] 
[[CreateAntivirusTaskSchedule]] 
[[CreateDataReplicationTask]] 
[[CreateDrepTaskSchedule]] 
[[CreateNewChapUser]] 
[[CreateNewPool]] 
[[CreateNewUser]] 
[[CreateRestartSchedule]] 
[[CreateShare]] 
[[CreateShutdownSchedule]] 
[[CreateSnapshotTaskSchedule]] 
[[CreateSwRaid]] 
[[CreateVolumeReplicationTaskSchedule]] 
[[CurrentTime]] 
[[CurrentTimeSNMP]] 
[[DefaultGateway]] 
[[DefineVolumeReplicationTask]] 
[[DeleteChapUser]] 
[[DisksLocalizer]] 
[[DisksLocalizerSW]] 
[[DnsSettings]] 
[[DnsStatus]] 
[[DownloadHardwareStamp]] 
[[DrepTask]] 
[[DrepTasks]] 
[[DriversInfo]] 
[[EMULEXAdministration]] 
[[EditChapUser]] 
[[EmailNotification]] 
[[Ethernet]] 
[[EthernetStatus]] 
[[ExtensionsKeysLoader]] 
[[FCAddLun]] 
[[FCCreateNewGroup]] 
[[FCCreateNewWWNUser]] 
[[FCRemove]] 
[[FCRemoveWWNUser]] 
[[FCRename]] 
[[FCWWNUserAccess]] 
[[FCWWNUserInfo]] 
[[FailoverManager]] 
[[FailoverTriggering]] 
[[FibreChannel]] 
[[ForceUserAndGroup]] 
[[FtpSettings]] 
[[FtpShareSettings]] 
[[FtpStatus]] 
[[GidMappings]] 
[[GroupCreate]] 
[[GroupRemove]] 
[[GroupRename]] 
[[GroupSharesAccess]] 
[[GroupsShareAccess]] 
[[HardwareIntel2ULocalizer]] 
[[HardwareIntelMC2Localizer]] 
[[HardwareMonitoring]] 
[[HelpManual]] 
[[HelpRegister]] 
[[HelpService]] 
[[HostName]] 
[[HostsBinding]] 
[[HttpProxy]] 
[[HttpProxyStatus]] 
[[HttpShareAccess]] 
[[HttpShareAccessSetup]] 
[[HttpsSecurityProtocol]] 
[[InfoSwRaid]] 
[[InitiatorIscsiName]] 
[[InitiatorTargetManager]] 
[[IntelIOAT]] 
[[InterfaceInfo]] 
[[InterfacesStatus]] 
[[IscsiSessionManager]] 
[[IscsiStatus]] 
[[IscsiTargetRemove]] 
[[LSILogicAdministration]] 
[[LanguageSettings]] 
[[LocalBackupSettings]] 
[[Logs]] 
[[LogsViewer]] 
[[LvStatus]] 
[[LvsInfo]] 
[[MacStatus]] 
[[ManagerSwRaid]] 
[[MirrorServerIp]] 
[[NDMPDataServer]] 
[[NDMPDataServerAccess]] 
[[NasConnectionsReset]] 
[[NewAntivirusTask]] 
[[NewPortalServer]] 
[[NewTargetAccess]] 
[[NfsSettings]] 
[[NfsShareAccess]] 
[[NfsStatus]] 
[[PingNodesModule]] 
[[PortalManager]] 
[[PortalRemove]] 
[[PowerButtonSettings]] 
[[ProductActivation]] 
[[QLOGICAdministration]] 
[[QLOGICTargetInitiator]] 
[[Quota]] 
[[QuotaForGroups]] 
[[QuotaForMemberOfTheGroup]] 
[[QuotaForUsers]] 
[[Raid3WareAdministrations]] 
[[Raid3WareManager]] 
[[RaidAdaptec]] 
[[RaidAreca]] 
[[RaidDynamicMegaraid]] 
[[RaidExternalAreca]] 
[[RaidHp]] 
[[RaidHptiop]] 
[[RaidIcpVortex]] 
[[RaidIcpVortexDomain]] 
[[RaidIcpVortexLocalLdap]] 
[[RaidIntelMegaraidSas]] 
[[RaidMegaraid]] 
[[RaidMegaraidSas]] 
[[RaidPromise]] 
[[RaidZeroChannel]] 
[[RamInfo]] 
[[RemoteAccess]] 
[[RemoteLogServerConfiguration]] 
[[RemoveDrepTask]] 
[[RemoveSwRaid]] 
[[ReplicationTasksManager]] 
[[ReplicationTasksManagerIn]] 
[[ResourceGroupsManager]] 
[[ResourcesSmbSettings]] 
[[RestoreOldSystem]] 
[[RestoreTasks]] 
[[RunningTasks]] 
[[ScheduleForAntivirusTask]] 
[[ScheduleForDrepTask]] 
[[ScheduleForRestart]] 
[[ScheduleForShutdown]] 
[[ScheduleForSnapshotTask]] 
[[SchedulesForVolumeReplicationTask]] 
[[ServerName]] 
[[Services]] 
[[SetTime]] 
[[SettingsRemove]] 
[[SettingsRestore]] 
[[SettingsSave]] 
[[ShareEdit]] 
[[ShareRemove]] 
[[SmartEmailNotification]] 
[[SmartHealthStatus]] 
[[SmartStatus]] 
[[SmartTest]] 
[[SmbSettings]] 
[[SmbStatus]] 
[[SnapshotDefinition]] 
[[SnapshotInfo]] 
[[SnapshotTasks]] 
[[SnapshotTasksVg]] 
[[SnmpConfig]] 
[[SnmpGraphs]] 
[[SoftwareUpdate]] 
[[SplashPrev]] 
[[StaticRoutingManager]] 
[[SwRaidEmailNotification]] 
[[SynchronizeAgent]] 
[[SynchronizeAgentSettings]] 
[[SystemRestart]] 
[[SystemShutdown]] 
[[TargetCreate]] 
[[TargetIpAccess]] 
[[TargetRemove]] 
[[TargetRename]] 
[[TargetVolumeManager]] 
[[TasksLogs]] 
[[TipsSettings]] 
[[Trial]] 
[[UPnPSettings]] 
[[UidGidSynchronization]] 
[[UidMappings]] 
[[UnitManager]] 
[[UnitRescan]] 
[[UnitsAssigned]] 
[[UpdateDownloader]] 
[[UpdateLocalVirusDefinitions]] 
[[UpdateVirusDefinitions]] 
[[UpsConfiguration]] 
[[UpsStatus]] 
[[UserEdit]] 
[[UserGroupsMembership]] 
[[UserQuota]] 
[[UserRemove]] 
[[UserRename]] 
[[UserSharesAccess]] 
[[UsersGroupMembership]] 
[[UsersShareAccess]] 
[[VolumeManager]] 
[[VolumeReplicationMode]] 
[[antivirus]] 
[[backupTasksLogs]] 
[[chapUsers]] 
[[dataReplicationTasks]] 
[[failoverquickstartguideAA]] 
[[failoverquickstartguideAP]] 
[[groups]] 
[[help_failover_important_notes]] 
[[help_how_to_access_iscsi_target_snapshot]] 
[[help_how_to_access_snapshot]] 
[[help_ip_enter]] 
[[help_lv_tree]] 
[[help_running_tasks_details]] 
[[help_sr_raid5_parity-algorithm]] 
[[help_sr_raid6_parity-algorithm]] 
[[help_tasks_log_details]] 
[[httpscertsChrome]] 
[[httpscertsFirefox]] 
[[httpscertsIE]] 
[[httpscertsOpera]] 
[[ifconfigTree]] 
[[ifstatusTree]] 
[[portals]] 
[[shares]] 
[[snapshots]] 
[[softraidsTree]] 
[[statisticsTree]] 
[[targets]] 
[[unitsTree]] 
[[users]] 
[[vgStatusTree]] 
[[volumeReplicationTasks]] 
[[volumes]] 
[[wwn_groups]] 
[[wwn_users]]

Available versions

2014-05-16T12:42:40Z

Maintenance script: Importing text file

This function allows you to update the system software. Two types of updates are available:
 

<ul>
<li>
full product version update
</li>
<li>
small update
</li>
</ul>

The function allows you to:

<ul>
<li>
have several product versions
</li>
<li>
delete updates (full and small) (the

X

button)
</li>
<li>
default setting of product version activated (button V)
</li>
<li>
having a constant insight into release notes (full and small updates) when unrolling a scrollbar with a particular product version
</li>
</ul>
 
Description of a product version:
 
 
<ul>
<li>
first three digits are related to product version number
</li>
<li>
next two digits are related to "up" with a number
</li>
<li>
product release date
</li>
<li>
name of a directory with a product
</li>
<li>
size of a directory with a product version
</li>
</ul>
 
While performing each update file upload release notes are introduced and update accepting or rejecting is possible. After accepting please click the

reboot

button so that the changes could take effect.
 
 
Option of default product version ("Boot" unit) means that the version marked will be booted automatically without a need of choosing a version in menu while system starting.
 
 
<div class="noteheader">
Note
</div>
<div class="note">
Small update is performed only for currently activated product version.
 
</div>

SNMP settings

2014-05-16T12:42:39Z

Maintenance script: Importing text file

This function enables you to configure access over the SNMP protocol in versions 2 or 3.


With SNMP enabled, you receive a wealth of information (CPU usage, system load, memory info, ethernet traffic, running processes).
 
System location and system contact are only for your information. For example, when you connect from an SNMP client, you will see your location and name.


SNMP, version 3 has an encrypted transmission feature as well as authentication by username and password.
 
SNMP, version 2 does not have encrypted transmission, and authentication is done only via the community string.


The community string you set can contain up to 20 characters, while the password needs to have at least 8 characters.


Links to SNMP clients:

<dl>
<dd>
<a href="http://www.muonics.com">
http://www.muonics.com
</a>
 
</dd>
<dd>
<a href="http://www.mg-soft.com">
http://www.mg-soft.com
</a>
 
</dd>
<dd>
<a href="http://www.manageengine.com">
http://www.manageengine.com
</a>
 
</dd>
</dl>
<div class="noteheader">
 
Note
</div>
<div class="note">
Our storage system supports the SNMP protocol in MIB-II standard. List of MIBs:
 
<ul>
<li>
- mib-2.host
</li>
<li>
- mib-2.ip
</li>
<li>
- mib-2.tcp
</li>
<li>
- mib-2.udp
</li>
<li>
- mib-2.interfaces
</li>
<li>
- mib-2.at
</li>
<li>
- system
</li>
</ul>
</div>

Manually saved settings

2014-05-16T12:42:36Z

Maintenance script: Importing text file

With this function you can store configuration settings.


Select the settings you want to store and click

Apply

. Settings can be saved locally on the server (they will be visible in the

Restore settings

function) and/or as a downloadable file. Each time you save settings locally, a new entry will be created and you will be able to select which settings to restore during the restore process.


You can restore settings using the

Restore settings

function.

<div class="noteheader">
Note
</div>
<div class="note">
Settings will also be saved automatically every time the server is restarted or shut down. These are stored in files following the naming convention

auto_save_X

/

auto_save_last

.
 
 
</div>

Time and date settings

2014-05-16T12:42:35Z

Maintenance script: Importing text file

With this function you can set the time and date:

<dl>
<dt>
Manual
</dt>
<dd>
Type in the time and date using the following format:

hh:mm:ss yyyy-mm-dd

. Use military format, i.e., 00:00 to 23:59.
</dd>
<dt>
Use this PC time
</dt>
<dd>
The time and date on the PC on which you have your web browser will be used.
</dd>
<dt>
NTP server
</dt>
<dd>
This will pick up the time and date from an NTP server. In this case please make sure you have Internet access and proper network setup, especially the gateway and DNS. You can check proper Internet access by using ping from the console tools.
 
At the console, press

Ctl-Alt-T

. Select '

Ping

'.
</dd>
<dd>
To use this option you must set the correct NTP server in the

Time zone settings

function.
</dd>
</dl>
<div class="noteheader">
Note
</div>
<div class="note">
Time setting is very important for proper functioning of the server.
 
</div>

Network settings

2014-05-16T12:42:34Z

Maintenance script: Importing text file

<dl>
<dt>
Server Name
</dt>
<dd>
Please enter a server name to clearly identify your server. This name is used primarily for

NAS protocols

, which makes it different from the

hostname

, which is primarily used internally (for

failover

and

volume replication

functions).
 
</dd>
<dt>
Comment
</dt>
<dd>
Here you can enter a short description of your server.
</dd>
</dl>

Server name and comment rules:

<ul>
<li>
please make sure the server name is unique in your network
</li>
<li>
select a server name that clearly identifies your new server
</li>
<li>
please do not use spaces and special characters such as

~!@#$^&()+[]{}*;:'".,%|<>?/\=`_

</li>
<li>
server name cannot consist of digits only
</li>
<li>
comment is not displayed on some systems
</li>
 
</ul>

Remote console access

2014-05-16T12:42:30Z

Maintenance script: Importing text file

Using this function, you can manage console tools remotely via the SSH protocol (secure shell). The default user is

cli

and cannot be altered. The password, however, can be changed.


Allow IP
 

Here you can assign IP addresses (separated by a semicolon) which are granted remote access to the server. When left blank, the field indicates no restrictions.
 

Set port
 

The default port is 22222 for security reasons, because high-number ports are invisible to port scanners. You can only change the setting to a port within the 1024-65535 range. You cannot indicate ports already in use.
 

Password
 

Password length is 5 characters minimum. Be sure to use strong passwords.
 

Confirm password
 

Please retype your new password.


Password cannot contain:

<ul>
<li>
special characters such as

' " ` ^ & $ # [ ] \/ | *

</li>
<li>
spaces
</li>
</ul>

To connect to the server from Linux/MacOSX systems use:
 

ssh -2 -p 22222 -l cli ip_address


where:
<ul>
<li>
option: -2 indicates the SSH protocol version used for connection
</li>
<li>
option: -p indicates the remote access port
</li>
<li>
option: -l indicates the user (the user needs to be

cli

)
</li>
<li>
option: address_ip indicates the address of the server to which you want to connect
</li>
</ul>

You will be asked for the remote access password you have entered on the server.


To connect to the server from Microsoft Windows, download the free SSH client (
<a href="http://www.putty.nl">
Putty
</a>
):

<ul>
<li>
in the

Host Name

(or

IP address

) field, enter the IP address of the server
</li>
<li>
in the

Port

field, enter the same port as in the server GUI (default 22222)
</li>
<li>
in the

Protocol

field, select

SSH

</li>
<li>
in the category:

Connection

->

Data

->

Auto-login-username,

enter:

cli

</li>
<li>
in

Terminal

->

Keyboard

->

The Function Keys and keypad,

select

VT100+

</li>
<li>
go back to the

Session

category, enter the session name in the

Saved Sessions

field, and click the

Save

button
</li>
<li>
click on the newly saved session, click

Open,

and enter the password. (If you have not entered the Auto-login-username, Putty will prompt you for a username. At the prompt, enter

cli

).
</li>
</ul>

Ping Nodes

2014-05-16T12:42:22Z

Maintenance script: Importing text file

A ping node is a pseudo-member of a failover. It is located outside of the failover and serves to answer ICMP requests from failover members. (this means the ping node cannot be either the primary or the secondary node). It is there to make sure the outside connection for the failover members remains online.


For instance, if the ICMP request from the active node to the ping node fails, a similar request is performed by the remote node. If this one succeeds, resources are moved from the active node to the remote note. Automatic failover will only take place if all ping nodes become unavailable for one of the active nodes (e.g. the server does not take action when at least one ping node is reachable).
The ping node needs only to be able to receive and reply to ICMP echo requests.

<dl>
<dt>

add new ping node

</dt>
<dd>
pressing this button will expand the window and show an empty area to enter an IP address of a ping node. Pressing the button for the second time will add the enter IP address to the ping node list.
</dd>
</dl>

When a new IP address of a ping node is entered, the status for the ping nodes is automatically being verified on both nodes. As a result the status is shown for both the local node and for the remote node.

<dl>
<dt>

trash bin icon ("delete" button)

</dt>
<dd>
Expands the window and shows the key to remove the particular ping node from the list.
</dd>
<dt>

cancel

</dt>
<dd>
Is used to hide the expanded view.
</dd>
</dl>
 
<div class="noteheader">
Note
</div>
<div class="note">
You can indicate up to 10 ping nodes but only one ping node can be entered at once.
</div>

HardwareMonitoring

2014-05-16T12:42:12Z

Maintenance script: Importing text file

This function monitors hardware.
To enable it, you need to access the

Hardware Configuration tool

in the console followed by

Hardware options

(

press F1 in the console to list keyboard shortcuts

).


When using the

LmSensors

hardware mode you can find information on the following
parameters here:

<ul>
<li>
motherboard temperature,
</li>
<li>
CPU temperature,
</li>
<li>
chipset temperature,
</li>
<li>
Vcore,
</li>
<li>
fan rotation speed.
</li>
</ul>

After initializing, a chipset selection window appears, followed by
sensor selection.
 
The sensor selection screen comprises of three columns. The first column
displays the sensor name as indicated by lmsensors; the second displays
the sensor name as indicated by the user; the third displays the ideal
value for the given sensor.
 
After a sensor has been selected you will be presented with its
configuration window. The state of the sensor is indicated at the top.
Configurable values are divided between two columns.
 

<ul>
<li>

Label

- the user-modifiable sensor name.
</li>
<li>

Ideal value

.
</li>
<li>

Minimal value

- if the current value is smaller than the minimal value
it will be marked in red in the server GUI.
</li>
<li>

Maximum value

- if the current value is larger than the maximum value
it will be marked in red in the server GUI.
</li>
<li>

Multiplex

- the actual current value will be multiplied by the
multiplex value, the result being shown as the current value.
</li>
<li>

Addition

- the addition value will be added to the actual current
value, the result being shown as the current value.
</li>
<li>

Ignore

- when this option is enabled, the sensor in question will not
be displayed in the server GUI.
</li>
</ul>

When using the

mbmon

(motherboard monitor) hardware mode you can find information on the following parameters here:

<ul>
<li>
motherboard temperature,
</li>
<li>
CPU temperature,
</li>
<li>
chipset temperature,
</li>
<li>
Vcore.
</li>
</ul>
<table border="0">
<tbody>
<tr>
<th colspan="2">
Supported chipset families
</th>
</tr>
<tr>
<th>
winbond
</th>
<td>
LM78/LM79, W83781D, W83782D, W83783S, W83627HF, W83697HF, AS99127F, ASB100
</td>
</tr>
<tr>
<th>
wl784
</th>
<td>
W83L784R, W83L785R, W83L785TS-S
</td>
</tr>
<tr>
<th>
via686
</th>
<td>
VT82C686A/B
</td>
</tr>
<tr>
<th>
it87
</th>
<td>
IT8705F, IT8712F
</td>
</tr>
<tr>
<th>
gl52
</th>
<td>
GL518SM, GL520SM
</td>
</tr>
<tr>
<th>
lm85
</th>
<td>
LM85, ADM1024, ADM1025, ADM1027, ADT7463, EMC6D10X
</td>
</tr>
<tr>
<th>
lm80
</th>
<td>
LM80
</td>
</tr>
<tr>
<th>
lm90
</th>
<td>
LM90, ADM1020, ADM1021, ADM1023
</td>
</tr>
<tr>
<th>
lm75
</th>
<td>
LM75
</td>
</tr>
</tbody>
</table>

When using the

xyratex

hardware mode you can find information on the following parameters here:

<ul>
<li>
disk status,
</li>
<li>
fan speed,
</li>
<li>
fan PWM,
</li>
<li>
power status,
</li>
<li>
fan status,
</li>
<li>
temperature.
</li>
</ul>

When using the

IPMI (sensors)

mode the information displayed depends on your motherboard. To enable this mode you need to have a motherboard with a sensor management component which supports access via IPMI.


When using the

Intel SSR212 2U

mode you can find information on the following parameters here:

<ul>
<li>
power status,
</li>
<li>
memory voltage,
</li>
<li>
voltage levels,
</li>
<li>
box temperature,
</li>
<li>
CPU temperature,
</li>
<li>
fan speed.
</li>
</ul>

When using the

Intel SR2500ALLX

mode you can find information on the following parameters here:

<ul>
<li>
power status,
</li>
<li>
memory voltage,
</li>
<li>
voltage levels,
</li>
<li>
box temperature,
</li>
<li>
CPU temperature,
</li>
<li>
fan speed,
</li>
<li>
disk status.
</li>
</ul>

When using the

AOC-SAT2-MV8

mode you can find information on the following parameters here:

<ul>
<li>
Unit - displays the unit name,
</li>
<li>
Bay - number of the bay into which the unit is inserted,
</li>
<li>
Serial Number - unit serial number.
</li>
</ul>

When using the

Intel SSR212MC2

mode you can find information on the following parameters here:

<ul>
<li>
Disc status - displays disk status,
</li>
<li>
BBU status - displays backup battery unit status,
</li>
<li>
BBU Capacity Info - displays backup battery unit capacity stats,
</li>
<li>
BBU Properties - displays backup battery unit properties,
</li>
<li>
BBU Design Info - displays backup battery unit design parameters,
</li>
<li>
IPMI Sensors - IPMI Sensors stats.
</li>
</ul>

E-mail notifications

2014-05-16T12:42:03Z

Maintenance script: Importing text file

The server can send an e-mail notification to the administrator in case of any
significant events, critical errors, warnings, etc. To enable this feature check the

Send errors

box.

<dl>
<dt>
E-mail
</dt>
<dd>
E-mail address from which notifications will be send.
</dd>
<dt>
Account name
</dt>
<dd>
Account name for the e-mail address from which notifications will be sent.
</dd>
<dt>
Password
</dt>
<dd>
Password for the account provided above.
</dd>
<dt>
SMTP
</dt>
<dd>
SMTP server name.
</dd>
<dt>
Destination e-mail
</dt>
<dd>
Administrator e-mail address to which notifications will be sent.
</dd>
<dt>
Port
</dt>
<dd>
Port number for the SMTP server.
</dd>
</dl>

If you want to send a test message, please check the

Send test message

option.
 
If you want to encrypt e-mail notifications, check the

Encrypted

option. E-mail notifications are encrypted with the TLS protocol.

Default gateway

2014-05-16T12:42:00Z

Maintenance script: Importing text file

This function allows you to set a default gateway for the storage system. Only

one

default gateway can be set up at any given time.

<div class="noteheader">
Note
</div>
<div class="note">
The default gateway will become

inactive

if any of the following conditions are met:
 
<ul>
<li>
the interface with the default gateway has become part of a bonding interface,
</li>
<li>
the interface with the default gateway has been removed or deactivated (concerns both physical and bonding interfaces).
</li>
</ul>
 
</div>
<div class="noteheader">
Note
</div>
<div class="note">
It is possible to set the default gateway on an inactive interface. In such a case, the gateway will remain inactive until that interface is activated.
 
 
</div>
<div class="noteheader">
Note
</div>
<div class="note">
If the interface you are setting the default gateway on does not have any gateway defined (i.e. the

Gateway

field says

Undefined

), you will need to define a gateway first (under the text console, please press CTRL+ALT+N and select the interface followed by

Gateway

).
</div>

Discovery CHAP user access

2014-05-16T12:41:57Z

Maintenance script: Importing text file

To create a user, enter their username and password, retype the password and press

Create

.

<div class="noteheader">
Note
</div>
<div class="note">

Username cannot:

<ul>
<li>
contain the following special characters

~ ! @ # $ ^ & ( ) + [ ] { } * ; : ' " ., ; % | < >
? / \ = `

,
</li>
<li>
begin or end with a space,
</li>
<li>
consist only of the number 0.
</li>
</ul>

Password cannot:

<ul>
<li>
contain the following special characters ' " `,
</li>
<li>
contain spaces.
</li>
</ul>

If users forget their password, there is no way to retrieve it. You can only set a new password.

</div>

Zpool wizard

2014-05-16T12:41:57Z

Maintenance script: Importing text file

This function allows you to create pools. Pools are used for grouping tapes that belong to storages.
 
 

Available options:

<ol>
<li>
Name - the name of the pool,
</li>
<li>
Tape retention
after - time period in which data will be stored on tapes. This time is taken into account in situation, when status of tape is Used or Full. After expiring this time all data on tapes will be rewritten.
</li>
<li>
Use each tape only once - it means, that after first backup tape will be marked as Used.
</li>
</ol>


To create a pool:


<ul>
<li>
enter its name,
</li>
<li>
set the retention time,
</li>
<li>
optionally you can enable

Use each tape only once

option.
</li>
</ul>

Gui access

2014-05-16T12:41:50Z

Maintenance script: Importing text file

Use this function to restrict access to server administration.

<dl>
<dt>
HTTPS port
 
</dt>
<dd>
You can change the https port here (the default setting is 443).
</dd>
<dt>
Allow access IP
 
</dt>
<dd>
You can assign IP addresses (separated by a semicolon) that are allowed to
access the server administration webpage. When left blank, the field indicates no
restrictions.
</dd>
<dt>
Lock console without password
</dt>
<dd>
Disables access to the console (and LCD keys).
</dd>
<dt>
Lock console with password
</dt>
<dd>
To get access to the console (and LCD keys) you need to type in the password. Note that this password should be exactly 8 characters long and include only digits from 1 to 4.
</dd>
<dt>
Unlock console
</dt>
<dd>
Unrestricted access to the console.
</dd>
</dl>
<div class="noteheader">
Note
</div>
<div class="note">
Please exercise caution with this function if all computers in the network receive IP addresses via DHCP: current IP can be replaced by a new one after the lease ends.
 
Please pay special attention when using the

Lock console

feature - you will not be able to
reset to default administrator access from the console if you make a
mistake while setting the

IP address

.
 
If you need to restore the default settings, please access the console, press CTRL+ALT+X to enter the

Extended Tools

view and select

Restore default administrator settings

.
</div>