Advanced failover settings - Revision history

Ma-W at 10:00, 27 March 2019

2019-03-27T10:00:56Z

@@ Line 1: / Line 1: @@
-The following advanced settings can ONLY &nbsp;be changed if advised by Open-E Technical Support.
+The following advanced settings can ONLY be changed if advised by Open-E Technical Support.
-<div><br/></div><div>&nbsp;These variables adjust several cluster behaviors, which are described in a more detailed way below.<br/></div><div><br/></div><div><br/></div><div>'''*Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout.&nbsp;</div><div><br/></div><div><br/></div><div><br/></div><div>'''*The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration.&nbsp;</div><div><br/></div><div><br/></div><div><br/></div><div>'''*Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div>&nbsp;This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol.&nbsp;</div><div><br/></div><div><br/></div><div><br/></div><div>'''*Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div>&nbsp;This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>
 [[Category:Help topics]]

Ma-W: 1 revision

2018-02-07T10:12:38Z

1 revision

← Older revision	Revision as of 10:12, 7 February 2018
(No difference)

Ma-W at 12:55, 25 January 2018

2018-01-25T12:55:50Z

← Older revision		Revision as of 12:55, 25 January 2018
Line 1:		Line 1:
	The following advanced settings can ONLY  be changed if advised by Open-E Technical Support.		The following advanced settings can ONLY  be changed if advised by Open-E Technical Support.
	<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>		<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.<br/></div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>

	[[Category:Help topics]]		[[Category:Help topics]]

Ma-W at 11:41, 27 July 2017

2017-07-27T11:41:28Z

← Older revision		Revision as of 11:41, 27 July 2017
Line 1:		Line 1:
	The following advanced settings can ONLY  be changed if advised by Open-E Technical Support.		The following advanced settings can ONLY  be changed if advised by Open-E Technical Support.
	<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>		<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>

			[[Category:Help topics]]

migrate>To-K at 10:47, 10 September 2015

2015-09-10T10:47:10Z

← Older revision		Revision as of 10:47, 10 September 2015
Line 1:		Line 1:
	~~Following~~ advanced settings can be ~~edited only at user's own responsibility. Use only~~ if ~~you really know what you're doing~~.		The following advanced settings can ONLY  be changed if advised by Open-E Technical Support.
	<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default ~~2000ms~~</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 4</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''*Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>		<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 10000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 10</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>

migrate>To-K: Created page with "Following advanced settings can be edited only at user's own responsibility. Use only if you really know what you're doing.

These variables adjust s..."

2015-09-08T07:32:23Z

Created page with "Following advanced settings can be edited only at user's own responsibility. Use only if you really know what you're doing. <div><br/></div><div> These variables adjust s..."

New page

Following advanced settings can be edited only at user's own responsibility. Use only if you really know what you're doing.
<div><br/></div><div> These variables adjust several cluster behaviors, which are described in a more detailed way below.</div><div><br/></div><div><br/></div><div>'''Time before declaring a token is lost:'''</div><div><br/></div><div>Default 2000ms</div><div><br/></div><div>This variable sets in milliseconds how much time would elapse until a token loss is declared after not receiving a new token. This is the time spent on detecting a failure of a processor in the current configuration. Restarting the configuration takes about 50 milliseconds in addition to this timeout. </div><div><br/></div><div><br/></div><div><br/></div><div>'''*The number of token retransmissions before a new configuration is formed:'''</div><div><br/></div><div>Default 4</div><div><br/></div><div>This variable limits how many token retransmissions could be done without restarting the configuration. </div><div><br/></div><div><br/></div><div><br/></div><div>'''*Waiting time for join messages in the membership protocol:'''</div><div><br/></div><div>Default 50ms</div><div><br/></div><div> This timeout limits in milliseconds how much time can elapse while waiting for join messages in the membership protocol. </div><div><br/></div><div><br/></div><div><br/></div><div>'''*Base UDP mcast port:'''</div><div><br/></div><div>Default 5405</div><div><br/></div><div> This variable sets the UDP port number for cluster to communicate. If you have multiple clusters on the same network and you are using the same multicast address, please configure the multicast ports with a 'Space'.</div><div><br/></div>