Remote console access - Revision history

Ma-W at 15:37, 27 March 2019

2019-03-27T15:37:03Z

← Older revision		Revision as of 15:37, 27 March 2019
Line 19:		Line 19:
	Password cannot contain:		Password cannot contain:

	special characters such as ~~<span>~~' " ` ^ & $ # [ ] \/ \|		special characters such as ' " ` ^ & $ # [ ] \/ \|
	*spaces		*spaces

Line 39:		Line 39:
	<br/>To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':		<br/>To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':

	::~~<span>~~[http://www.putty.org http://www.putty.org]~~</span>~~		::[http://www.putty.org http://www.putty.org]

	*in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server		*in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server

Ma-W at 15:36, 27 March 2019

2019-03-27T15:36:05Z

← Older revision		Revision as of 15:36, 27 March 2019
Line 23:		Line 23:

	To connect to the server from '''Linux/MacOSX''' systems use:		To connect to the server from '''Linux/MacOSX''' systems use:


	'''''ssh -2 -p 22222 -l admin ip_address'''''		'''''ssh -2 -p 22222 -l admin ip_address'''''


	where:		where:
Line 35:		Line 37:
	You will be asked for the remote access password you have entered on the server.		You will be asked for the remote access password you have entered on the server.

			<br/>To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':

	~~To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':~~		::<span>[http://www.putty.org http://www.putty.org]</span>

	::[http://www.putty.org http://www.putty.org]

	*in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server		*in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server
Line 49:		Line 50:

	'''NOTE:'''		'''NOTE:'''

	For '''Jovian 1.0 up01 and lower''', the default username login is: '''cli'''		For '''Jovian 1.0 up01 and lower''', the default username login is: '''cli'''

Ma-W at 15:33, 27 March 2019

2019-03-27T15:33:13Z

@@ Line 1: / Line 1: @@
-<div><span style="font-size:small">Using this function, you can manage '''console tools''' remotely via the '''SSH''' protocol (secure shell).</span></div>
+Using this function, you can manage '''console tools''' remotely via the '''SSH''' protocol (secure shell).
 *'''Allowed network Addresses'''
-<div><span style="font-size:small">Here you can assign network addresses (separated by a semicolon) which are granted remote access to the server.&nbsp; When left blank, the field indicates no restrictions.</span><br/></div>
 *'''Console port'''
-<div><span style="font-size:small">The default port is 22222 for security reasons,&nbsp;because&nbsp;high-number ports are invisible to port scanners.&nbsp; You can only change the setting to a port within the 1024-65535 range.&nbsp; You cannot indicate ports already in use.</span><br/></div>
 *'''Password'''
-<div><span style="font-size:small">Password length is 5 characters minimum.&nbsp; Be sure to use strong passwords.</span><br/></div>
 *'''Confirm password'''
-<span style="font-size: medium">For&nbsp;'''Jovian 1.0 up03 and newer''', &nbsp;the default username login is&nbsp;:&nbsp;'''admin'''</span>
+Please retype your new password.
 [[Category:Help topics]]

Ma-W: 1 revision

2018-02-07T14:55:53Z

1 revision

← Older revision	Revision as of 14:55, 7 February 2018
(No difference)

migrate>To-K at 09:49, 25 January 2018

2018-01-25T09:49:51Z

← Older revision		Revision as of 09:49, 25 January 2018
Line 15:		Line 15:
	*<div><span style="font-size:small">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>		*<div><span style="font-size:small">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>
	*<div><span style="font-size:small">option: address_ip indicates the address of the server to which you want to connect</span></div>		*<div><span style="font-size:small">option: address_ip indicates the address of the server to which you want to connect</span></div>
	<div><span style="font-size:small">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small">       [http://www.putty.nl http://www.putty.org]</span><br/></div>		<div><span style="font-size:small">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small">       [http://www.putty.org http://www.putty.org]</span><br/></div>
	*<div><span style="font-size:small">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>		*<div><span style="font-size:small">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>
	*<div><span style="font-size:small">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>		*<div><span style="font-size:small">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>

migrate>To-K at 08:49, 25 January 2018

2018-01-25T08:49:51Z

← Older revision		Revision as of 08:49, 25 January 2018
Line 15:		Line 15:
	*<div><span style="font-size:small">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>		*<div><span style="font-size:small">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>
	*<div><span style="font-size:small">option: address_ip indicates the address of the server to which you want to connect</span></div>		*<div><span style="font-size:small">option: address_ip indicates the address of the server to which you want to connect</span></div>
	<div><span style="font-size:small">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small">       [http://www.putty.nl http://www.putty.nl]</span></div>		<div><span style="font-size:small">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small">       [http://www.putty.nl http://www.putty.org]</span><br/></div>
	*<div><span style="font-size:small">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>		*<div><span style="font-size:small">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>
	*<div><span style="font-size:small">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>		*<div><span style="font-size:small">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>

Ma-W at 11:54, 27 July 2017

2017-07-27T11:54:00Z

migrate>To-K at 13:57, 17 July 2015

2015-07-17T13:57:47Z

migrate>To-K at 15:16, 13 November 2014

2014-11-13T15:16:41Z

← Older revision		Revision as of 15:16, 13 November 2014
Line 24:		Line 24:
	*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''cli ''' ).</span></div>		*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''cli ''' ).</span></div>
	<div><br/></div><div>'''NOTE :'''</div>		<div><br/></div><div>'''NOTE :'''</div>
	<span style="font-size: medium;">For '''Jovian 1.0 up01 '''the default username login is : '''cli'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up01 and lower, '''the default username login is : '''cli'''</span>

	<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>

migrate>To-K at 14:49, 13 November 2014

2014-11-13T14:49:17Z

← Older revision		Revision as of 14:49, 13 November 2014
Line 23:		Line 23:
	*<div><span style="font-size:small;">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>		*<div><span style="font-size:small;">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>
	*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''cli ''' ).</span></div>		*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''cli ''' ).</span></div>
	<div~~><span style="font-size:small;"></span~~><br/></div><div~~><span style="font-size:small;"></span~~>'''NOTE :'''</div>		<div><br/></div><div>'''NOTE :'''</div>
	<span style="font-size: medium;">For '''Jovian 1.0 up01 ~~and earlier,~~  '''the default username login is : '''cli'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up01 '''the default username login is : '''cli'''</span>

	<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>

← Older revision		Revision as of 11:54, 27 July 2017
Line 1:		Line 1:
	<div><span style="font-size:small;">Using this function, you can manage '''console tools''' remotely via the '''SSH''' protocol (secure shell).</span></div>		<div><span style="font-size:small">Using this function, you can manage '''console tools''' remotely via the '''SSH''' protocol (secure shell).</span></div>
	*'''Allowed network Addresses'''		*'''Allowed network Addresses'''
	<div><span style="font-size:small;">Here you can assign network addresses (separated by a semicolon) which are granted remote access to the server.  When left blank, the field indicates no restrictions.</span><br/></div>		<div><span style="font-size:small">Here you can assign network addresses (separated by a semicolon) which are granted remote access to the server.  When left blank, the field indicates no restrictions.</span><br/></div>
	*'''Console port'''		*'''Console port'''
	<div><span style="font-size:small;">The default port is 22222 for security reasons, because high-number ports are invisible to port scanners.  You can only change the setting to a port within the 1024-65535 range.  You cannot indicate ports already in use.</span><br/></div>		<div><span style="font-size:small">The default port is 22222 for security reasons, because high-number ports are invisible to port scanners.  You can only change the setting to a port within the 1024-65535 range.  You cannot indicate ports already in use.</span><br/></div>
	*'''Password'''		*'''Password'''
	<div><span style="font-size:small;">Password length is 5 characters minimum.  Be sure to use strong passwords.</span><br/></div>		<div><span style="font-size:small">Password length is 5 characters minimum.  Be sure to use strong passwords.</span><br/></div>
	*'''Confirm password'''		*'''Confirm password'''
	<div><span style="font-size:small;">Please retype your new password.</span></div><div><span style="font-size:small;">Password cannot contain:</span></div>		<div><span style="font-size:small">Please retype your new password.</span></div><div><span style="font-size:small">Password cannot contain:</span></div>
	<div><span style="font-size:small;">special characters such as <span>' " ` ^ & $ # [ ] \/ \| </span></span></div>		<div><span style="font-size:small">special characters such as <span>' " ` ^ & $ # [ ] \/ \| </span></span></div>
	*<span style="font-size:small;">spaces</span>		*<span style="font-size:small">spaces</span>
	<div><span style="font-size: small;">To connect to the server from </span>'''Linux/MacOSX '''<span style="font-size: small;">systems use:</span></div><div><br/><span style="font-size:small;">'''''ssh -2 -p 22222 -l admin ip_address'''''</span></div><div><br/></div><div>''<span style="font-size:small;">where:</span>''</div>		<div><span style="font-size: small">To connect to the server from </span>'''Linux/MacOSX '''<span style="font-size: small">systems use:</span></div><div><br/><span style="font-size:small">'''''ssh -2 -p 22222 -l admin ip_address'''''</span></div><div><br/></div><div>''<span style="font-size:small">where:</span>''</div>
	*<div><span style="font-size:small;">option: -2 indicates the SSH protocol version used for connection</span></div>		*<div><span style="font-size:small">option: -2 indicates the SSH protocol version used for connection</span></div>
	*<div><span style="font-size:small;">option: -p indicates the remote access port</span></div>		*<div><span style="font-size:small">option: -p indicates the remote access port</span></div>
	*<div><span style="font-size:small;">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>		*<div><span style="font-size:small">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>
	*<div><span style="font-size:small;">option: address_ip indicates the address of the server to which you want to connect</span></div>		*<div><span style="font-size:small">option: address_ip indicates the address of the server to which you want to connect</span></div>
	<div><span style="font-size:small;">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small;">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small;">       [http://www.putty.nl http://www.putty.nl]</span></div>		<div><span style="font-size:small">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small">       [http://www.putty.nl http://www.putty.nl]</span></div>
	*<div><span style="font-size:small;">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>		*<div><span style="font-size:small">in the '''Host Name ''' (or '''IP address ''' ) field, enter the IP address of the server</span></div>
	*<div><span style="font-size:small;">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>		*<div><span style="font-size:small">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>
	*<div><span style="font-size:small;">in the '''Protocol ''' field, select '''SSH'''</span></div>		*<div><span style="font-size:small">in the '''Protocol ''' field, select '''SSH'''</span></div>
	*<div><span style="font-size:small;">in the category: '''Connection ''' -> '''Data ''' -> '''Auto-login-username, ''' enter: '''admin'''</span></div>		*<div><span style="font-size:small">in the category: '''Connection ''' -> '''Data ''' -> '''Auto-login-username, ''' enter: '''admin'''</span></div>
	*<div><span style="font-size:small;">in '''Terminal ''' -> '''Keyboard ''' -> '''The Function Keys and keypad, ''' select '''VT100+'''</span></div>		*<div><span style="font-size:small">in '''Terminal ''' -> '''Keyboard ''' -> '''The Function Keys and keypad, ''' select '''VT100+'''</span></div>
	*<div><span style="font-size:small;">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>		*<div><span style="font-size:small">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>
	*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''admin'''''' ''').</span></div>		*<div><span style="font-size:small">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''admin'''''' ''').</span></div>
	<div><br/></div><div>'''NOTE :'''</div>		<div><br/></div><div>'''NOTE :'''</div>
	<span style="font-size: medium;">For '''Jovian 1.0 up01 and lower, '''the default username login is : '''cli'''</span>		<span style="font-size: medium">For '''Jovian 1.0 up01 and lower, '''the default username login is : '''cli'''</span>

	<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>		<span style="font-size: medium">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>

			[[Category:Help topics]]

← Older revision		Revision as of 13:57, 17 July 2015
Line 10:		Line 10:
	<div><span style="font-size:small;">special characters such as <span>' " ` ^ & $ # [ ] \/ \| </span></span></div>		<div><span style="font-size:small;">special characters such as <span>' " ` ^ & $ # [ ] \/ \| </span></span></div>
	*<span style="font-size:small;">spaces</span>		*<span style="font-size:small;">spaces</span>
	<div><span style="font-size: small;">To connect to the server from </span>'''Linux/MacOSX '''<span style="font-size: small;">systems use:</span></div><div><br/><span style="font-size:small;">'''''ssh -2 -p 22222 -l ~~cli~~ ip_address'''''</span></div><div><br/></div><div>''<span style="font-size:small;">where:</span>''</div>		<div><span style="font-size: small;">To connect to the server from </span>'''Linux/MacOSX '''<span style="font-size: small;">systems use:</span></div><div><br/><span style="font-size:small;">'''''ssh -2 -p 22222 -l admin ip_address'''''</span></div><div><br/></div><div>''<span style="font-size:small;">where:</span>''</div>
	*<div><span style="font-size:small;">option: -2 indicates the SSH protocol version used for connection</span></div>		*<div><span style="font-size:small;">option: -2 indicates the SSH protocol version used for connection</span></div>
	*<div><span style="font-size:small;">option: -p indicates the remote access port</span></div>		*<div><span style="font-size:small;">option: -p indicates the remote access port</span></div>
	*<div><span style="font-size:small;">option: -l indicates the user (the user needs to be '''~~cli~~ ''' )</span></div>		*<div><span style="font-size:small;">option: -l indicates the user (the user needs to be '''admin'''''' ''')</span></div>
	*<div><span style="font-size:small;">option: address_ip indicates the address of the server to which you want to connect</span></div>		*<div><span style="font-size:small;">option: address_ip indicates the address of the server to which you want to connect</span></div>
	<div><span style="font-size:small;">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small;">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small;">       [http://www.putty.nl http://www.putty.nl]</span></div>		<div><span style="font-size:small;">You will be asked for the remote access password you have entered on the server.</span></div><div><br/></div><div><span style="font-size:small;">To connect to the server from Microsoft Windows, download the free SSH client '''Putty ''':</span></div><div><br/></div><div><span style="font-size:small;">       [http://www.putty.nl http://www.putty.nl]</span></div>
Line 19:		Line 19:
	*<div><span style="font-size:small;">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>		*<div><span style="font-size:small;">in the '''Port ''' field, enter the same port as in the server GUI (default 22222)</span></div>
	*<div><span style="font-size:small;">in the '''Protocol ''' field, select '''SSH'''</span></div>		*<div><span style="font-size:small;">in the '''Protocol ''' field, select '''SSH'''</span></div>
	*<div><span style="font-size:small;">in the category: '''Connection ''' -> '''Data ''' -> '''Auto-login-username, ''' enter: '''~~cli~~'''</span></div>		*<div><span style="font-size:small;">in the category: '''Connection ''' -> '''Data ''' -> '''Auto-login-username, ''' enter: '''admin'''</span></div>
	*<div><span style="font-size:small;">in '''Terminal ''' -> '''Keyboard ''' -> '''The Function Keys and keypad, ''' select '''VT100+'''</span></div>		*<div><span style="font-size:small;">in '''Terminal ''' -> '''Keyboard ''' -> '''The Function Keys and keypad, ''' select '''VT100+'''</span></div>
	*<div><span style="font-size:small;">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>		*<div><span style="font-size:small;">go back to the '''Session ''' category, enter the session name in the '''Saved Sessions ''' field, and click the '''Save ''' button</span></div>
	*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''~~cli~~ ''' ).</span></div>		*<div><span style="font-size:small;">click on the newly saved session, click '''Open, ''' and enter the password.  (If you have not entered the Auto-login-username, Putty will prompt you for a username.  At the prompt, enter '''admin'''''' ''').</span></div>
	<div><br/></div><div>'''NOTE :'''</div>		<div><br/></div><div>'''NOTE :'''</div>
	<span style="font-size: medium;">For '''Jovian 1.0 up01 and lower, '''the default username login is : '''cli'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up01 and lower, '''the default username login is : '''cli'''</span>

	<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>		<span style="font-size: medium;">For '''Jovian 1.0 up03 and newer''',  the default username login is : '''admin'''</span>