Time and date settings - Revision history

Ma-W at 08:01, 28 March 2019

2019-03-28T08:01:17Z

← Older revision		Revision as of 08:01, 28 March 2019
Line 12:		Line 12:

	:This will retrieve the time and date from an NTP server. Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.		:This will retrieve the time and date from an NTP server. Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.

	:You can examine the Internet access by using ping from the console tools. At the console, use CTRL+ALT+NT and select 'Ping'.		:You can examine the Internet access by using ping from the console tools. At the console, use CTRL+ALT+NT and select 'Ping'.

	:With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.		:With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.

Ma-W at 08:00, 28 March 2019

2019-03-28T08:00:44Z

← Older revision		Revision as of 08:00, 28 March 2019
Line 7:		Line 7:
	'''Manual'''		'''Manual'''

	Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd. Use military format, i.e., 00:00 to 23:59.		:Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd. Use military format, i.e., 00:00 to 23:59.

	'''Continuous NTP synchronization'''		'''Continuous NTP synchronization'''

	This will retrieve the time and date from an NTP server. Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.		:This will retrieve the time and date from an NTP server. Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.

	You can examine the Internet access by using ping from the console tools. At the console, use CTRL+ALT+NT and select 'Ping'.		:You can examine the Internet access by using ping from the console tools. At the console, use CTRL+ALT+NT and select 'Ping'.

	With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.		:With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.

	'''Note:'''		'''Note:'''

Ma-W at 08:00, 28 March 2019

2019-03-28T08:00:11Z

← Older revision		Revision as of 08:00, 28 March 2019
Line 1:		Line 1:
	~~<div><div>~~This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.~~</div><div>~~Select the time zone suitable for your location.~~</div><div>~~Set the time using possible options:~~</div><div>~~'''Manual'''~~</div><div>   ~~ Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd. ~~ ~~Use military format, i.e., 00:00 to 23:59.~~</div><div>~~'''Continuous NTP synchronization'''~~</div><div>   ~~ This will retrieve the time and date from an NTP server. ~~ ~~Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.~~</div><div>   ~~ You can examine the Internet access by using ping from the console tools. ~~ ~~At the console, use CTRL+ALT+NT and select 'Ping'.~~</div><div>   ~~ With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.~~ </div><div><br/>~~'''Note:'''~~</div><div>~~The time setting is very important for proper functioning of the server.~~</div><div>~~The gateway and DNS network settings must be configured beforehand.~~</div></div>~~		This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.

			Select the time zone suitable for your location.

			Set the time using possible options:

			'''Manual'''

			Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd. Use military format, i.e., 00:00 to 23:59.

			'''Continuous NTP synchronization'''

			This will retrieve the time and date from an NTP server. Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.

			You can examine the Internet access by using ping from the console tools. At the console, use CTRL+ALT+NT and select 'Ping'.

			With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.

			'''Note:'''

			The time setting is very important for proper functioning of the server.
			The gateway and DNS network settings must be configured beforehand.

	[[Category:Help topics]]		[[Category:Help topics]]

migrate>Lu-K at 08:44, 23 October 2018

2018-10-23T08:44:45Z

← Older revision		Revision as of 08:44, 23 October 2018
Line 1:		Line 1:
	<div><div>This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.</div><div>Select the time zone suitable for your location.</div><div>Set the time using possible options:</div><div>'''Manual'''</div><div>    Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd.  Use military format, i.e., 00:00 to 23:59.</div><div>'''NTP ~~server~~'''</div><div>    This will retrieve the time and date from an NTP server.  Please select an NTP server (Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.</div><div>    You can examine the Internet access by using ping from the console tools.  At the console, use CTRL+ALT+NT and select 'Ping'.</div><div>    With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains. </div><div><br/>'''Note:'''</div><div>The time setting is very important for proper functioning of the server.</div><div>The gateway and DNS network settings must be configured beforehand.</div></div>		<div><div>This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.</div><div>Select the time zone suitable for your location.</div><div>Set the time using possible options:</div><div>'''Manual'''</div><div>    Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd.  Use military format, i.e., 00:00 to 23:59.</div><div>'''Continuous NTP synchronization'''</div><div>    This will retrieve the time and date from an NTP server.  Please select an NTP server (The Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.</div><div>    You can examine the Internet access by using ping from the console tools.  At the console, use CTRL+ALT+NT and select 'Ping'.</div><div>    With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains. </div><div><br/>'''Note:'''</div><div>The time setting is very important for proper functioning of the server.</div><div>The gateway and DNS network settings must be configured beforehand.</div></div>
	[[Category:Help topics]]		[[Category:Help topics]]

migrate>Lu-K: Lu-K moved page Time and date to Time and date settings: change

2018-10-23T08:38:33Z

Lu-K moved page Time and date to Time and date settings: change

← Older revision	Revision as of 08:38, 23 October 2018
(No difference)

migrate>Mi-S at 15:40, 29 January 2018

2018-01-29T15:40:21Z

← Older revision		Revision as of 15:40, 29 January 2018
Line 1:		Line 1:
	<div><div>This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.</div><div>Select the time zone suitable for your location.</div><div>Set the time using possible options:</div><div>'''Manual'''</div><div>    Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd.  Use military format, i.e., 00:00 to 23:59.</div><div>'''NTP server'''</div><div>    This will retrieve the time and date from an NTP server.  Please select an NTP server (Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.</div><div>    You can examine the Internet access by using ping from the console tools.  At the console, use CTRL+ALT+NT and select 'Ping'.</div><div>    With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains. </div><div><br/>'''Note:'''</div><div>The time setting is very important for proper functioning of the server.</div><div>The gateway and DNS network settings must be configured beforehand.</div></div>		<div><div>This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.</div><div>Select the time zone suitable for your location.</div><div>Set the time using possible options:</div><div>'''Manual'''</div><div>    Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd.  Use military format, i.e., 00:00 to 23:59.</div><div>'''NTP server'''</div><div>    This will retrieve the time and date from an NTP server.  Please select an NTP server (Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.</div><div>    You can examine the Internet access by using ping from the console tools.  At the console, use CTRL+ALT+NT and select 'Ping'.</div><div>    With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains. </div><div><br/>'''Note:'''</div><div>The time setting is very important for proper functioning of the server.</div><div>The gateway and DNS network settings must be configured beforehand.</div></div>
			[[Category:Help topics]]

migrate>Mi-S at 09:37, 29 January 2018

2018-01-29T09:37:40Z

← Older revision		Revision as of 09:37, 29 January 2018
Line 1:		Line 1:
	~~[[Category~~:~~Help topics]]~~		<div><div>This function enables to adjust the server '''time zone''' and to set up the '''time and date'''.</div><div>Select the time zone suitable for your location.</div><div>Set the time using possible options:</div><div>'''Manual'''</div><div>    Type in the time and date using the following format: hh:mm:ss yyyy-mm-dd.  Use military format, i.e., 00:00 to 23:59.</div><div>'''NTP server'''</div><div>    This will retrieve the time and date from an NTP server.  Please select an NTP server (Network Time Protocol, for more info go to: www.ntp.org). You may provide a fully qualified host name or an IP address. In this case please make sure you have access to the Internet and a proper network setup, especially the gateway and DNS.</div><div>    You can examine the Internet access by using ping from the console tools.  At the console, use CTRL+ALT+NT and select 'Ping'.</div><div>    With the continuous adjusting using the NTP option your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains. </div><div><br/>'''Note:'''</div><div>The time setting is very important for proper functioning of the server.</div><div>The gateway and DNS network settings must be configured beforehand.</div></div>

Ma-W at 11:56, 27 July 2017

2017-07-27T11:56:30Z

← Older revision	Revision as of 11:56, 27 July 2017
Line 1:	Line 1:
		[[Category:Help topics]]

migrate>Mi-S: Blanked the page

2017-02-06T11:14:07Z

Blanked the page

← Older revision		Revision as of 11:14, 6 February 2017
Line 1:		Line 1:
	~~<span style="font-size:small;">This function allows you to adjust NTP server settings.</span>~~

	~~<span style="font-size: small;">With this function you can set the time and date:</span>~~

	~~<span style="font-size: small;">'''Manual'''</span>~~

	~~:<span style="font-size: small;">Type in the time and date using the following format: </span><br/>~~
	~~:<br/>~~
	~~:<span style="font-size: small;">''hh:mm:ss yyyy-mm-dd ''.  Use military format, i.e., 00:00 to 23:59.</span>~~
	~~;<br/>~~
	~~;<span style="font-size: small;">Select an NTP server (Network Time Protocol: for more info please see: </span>''www.ntp.org''<span style="font-size: small;">).</span>~~
	~~;<br/>~~

	~~'''NTP server'''~~

	:<span style="font-size: small;">This will pick up the time and date from an NTP server.  In this case please make sure you have Internet access and proper network setup, especially the gateway and DNS.  You can check proper Internet access by using ping from the console tools. At the console, press '''Ctl-Alt-T '''.  Select ' '''Ping ''''.</span>
	~~:<span style="font-size: small;">To use this option you must set the correct NTP server in the '''Time zone settings '''function.</span>~~

	~~<span style="font-size:small;">You may provide a fully qualified host name or an IP address. Select time zone suitable for your location.</span>~~

	<span style="font-size:small;">With the '''Continuous adjusting using NTP''' option enabled your system time will be monitored and corrected if the difference between the local time and the server time changes. Enabling this option is especially recommended when using domains.</span>
	<div class="noteheader" style="border-bottom-style: none; font-weight: bold; font-style: italic; color: rgb(0, 0, 0); font-family: arial, helvetica, sans-serif; font-size: 14px;"><span style="font-size:small;">Note</span></div><div class="note" style="margin-left: 20px; color: rgb(0, 0, 0); font-family: arial, helvetica, sans-serif; font-size: 14px;"><span style="font-size:small;">Time setting is very important for proper functioning of the server.<br/>The gateway and DNS network settings must be configured beforehand.</span></div>

migrate>Ad-B at 14:18, 4 June 2014

2014-06-04T14:18:39Z

← Older revision		Revision as of 14:18, 4 June 2014
Line 1:		Line 1:
	<span style="font-size:small;">This function allows you to adjust NTP server settings.~~<br/>~~</span>		<span style="font-size:small;">This function allows you to adjust NTP server settings.</span>

	~~<span style="font-size:small;"></span>~~<span style="font-size: small;">With this function you can set the time and date:</span>		<span style="font-size: small;">With this function you can set the time and date:</span>

	<span style="font-size: small;">'''Manual'''</span>		<span style="font-size: small;">'''Manual'''</span>

	:<span style="font-size: small;">Type in the time and date using the following format: </span><br/>		:<span style="font-size: small;">Type in the time and date using the following format: </span><br/>
	:~~<span style="font-size: small;"</span>~~<br/>		:<br/>
	:<span style="font-size: small;">''hh:mm:ss yyyy-mm-dd ''.  Use military format, i.e., 00:00 to 23:59.</span>		:<span style="font-size: small;">''hh:mm:ss yyyy-mm-dd ''.  Use military format, i.e., 00:00 to 23:59.</span>
	;~~<span style="font-size: small;"></span>~~<br/>		;<br/>
	;<span style="font-size: small;">Select an NTP server (Network Time Protocol: for more info please see: </span>''www.ntp.org''<span style="font-size: small;">).</span>		;<span style="font-size: small;">Select an NTP server (Network Time Protocol: for more info please see: </span>''www.ntp.org''<span style="font-size: small;">).</span>
	;<br/>		;<br/>

	'''NTP server'''		'''NTP server'''